| T O P I C R E V I E W |
| FetNat |
Posted - 15/05/2013 : 22:45:04
Hi, I generated successfully a calibrated swiss map from a .jpg. I used the proj/datum WGS84 / UTM zone 32N. In OKMap all seems OK.
I used "Map tiling" function in "Utilities" to create an OruxMap tiled map.
In OruxMap on my smartphone the swissgrid coordinates of Scuol in Engadin (818000, 187000) becomes : 818097, 187150. It's really 818000, 187000 in OKMap.
Where have I done a mistake?
NB : I tried to calibrate the map with proj/datum Swiss New Grid, but during the tiling process I got the message "not supported projection". |
| 9 L A T E S T R E P L I E S (Newest First) |
| okmap |
Posted - 26/05/2013 : 18:28:55
Try the new version. |
| okmap |
Posted - 17/05/2013 : 12:59:39
Of course. |
| FetNat |
Posted - 17/05/2013 : 10:18:07
Thanks a lot for this nice job.
Please can you send me a message when the new version is available. |
| okmap |
Posted - 16/05/2013 : 20:16:54
I've verified that Swiss Grid is supported by OruxMap.
I'll add this format as soon as possible.
Thanks for reporting.
|
| FetNat |
Posted - 16/05/2013 : 19:14:57
The problem appairs when I use the "Map tiling" function in "Utilities" to create an OruxMap.
Please look at the attached jpg
Allegato : Clipboard01.jpg#9;62.89 KB |
| okmap |
Posted - 16/05/2013 : 18:05:44
I've georeferenced the map you sent me without problem.
In attachment the .okm file. Please put it in the same folder of Test16.jpg file and open it with OkMap.
Allegato : Test16.zip#9;1.39 KB
The projection I've used is "Swiss New Grid" (datum = "CH1903+ (Switzerland)", projection = "Hotine Oblique Mercator".
I've also produced a tiled kmz file to test overlapping with Google Earth. Seems ok. |
| okmap |
Posted - 16/05/2013 : 16:58:30
Need permissions to download the file. |
| FetNat |
Posted - 16/05/2013 : 14:04:02
Hi,
I use OKMap 10.8.8 and OruxMap 5.2.4
I did following steps:
1)Map setup CH1903+
2)Edit coordinates in Alt tab
3)Change map setup to WGS/UTM 32 N to avoid "not supported projection" message.
4)Grid setup CH1903+
5)Accept and Save to Test16
6)Use "Map tiling" function in "Utilities" to create an OruxMap tiled map.
Thank you for the help.
Allegato : Attachement.zip#9;657 Bytes |
| okmap |
Posted - 16/05/2013 : 09:31:36
Please can you send me the map so I can do some tests?
Which version of OkMap do you use? |
